Lean Six Sigma Training Guide Copy
  • Free Lean Six Sigma Training Guide
  • New Page
  • IASSC Free Training Guide
  • ASQ Free Training Guide
  • Practice Exams
    • Six Sigma Quick Training Tests >
      • Lean Six Sigma Practice Test 1
      • Lean Six Sigma Practice Test 2
      • Lean Six Sigma Practice Test 3
      • Lean Six Sigma Practice Test 4
      • Lean Six Sigma Practice Test 5
      • Lean Six Sigma Practice Test 6
      • Lean Six Sigma Practice Test 7
      • Lean Six Sigma Practice Test 8
      • Lean Six Sigma Practice Test 9
      • Lean Six Sigma Practice Test 10
      • Lean Six Sigma Practice Test 11
      • Lean Six Sigma Practice Test 12
    • Six Sigma DMAIC Training Tests >
      • DEFINE Six Sigma Training Test
      • MEASURE Six Sigma Training Test
      • ANALYZE Six Sigma Training Test
      • IMPROVE Six Sigma Training Test
      • CONTROL Six Sigma Training Test
    • IASSC, ASQ and Other Exams >
      • IASSC Six Sigma Black Belt Exam
      • IASSC Six Sigma Green Belt Exam
      • IASSC Six Sigma Yellow Belt Exam
      • Lean Six Sigma Exams By Topic >
        • I. Enterprise-Wide Deployment >
          • A. Enterprise-wide view
          • B. Leadership
        • II. Organizational Process Management and Measures >
          • A. Impact on stakeholders
          • B. Critical to x (CTx) requirements
          • C. Benchmarking
          • D. Business performance measures
          • E. Financial measures
        • IV. Define >
          • A. Voice of the customer
          • B. Project charter
          • C. Project tracking
        • V. Measure >
          • D. Basic statistics
      • ASQ Six Sigma Black Belt Exam
      • ASQ Six Sigma Green Belt Exam
  • Six Sigma Materials
    • The Problem Solving Strategy Y = f(x) in Lean Six Sigma
    • Value Stream Mapping Explained
    • Pareto Analysis And Pareto Chart Explained
    • Best 5 Free Online Degree Programs In 2017
    • Cost Of Poor Quality (COPQ) Explained
    • Best 4 Free Online Certifications To Boost Your Resume
    • Pareto Analysis and Pareto Chart
    • Why Six Sigma Certification?
    • Six Sigma Green Belt Training
    • General History of Six Sigma & Continuous Improvement
    • Walter Shewhart Biography
    • Basic Lean Six Sigma Metrics
    • How to Make a Histogram
    • Statistical Process Control Charts
    • Lean Six Sigma Term Glossary
    • Kaizen and Kaizen Blitz
    • Central Limit Theorem
    • Six Sigma Symbols
    • Six Sigma Tables >
      • Z Score Tables
      • T Distribution Table
      • Chi-Square Distribution Table
      • F Distribution Table
      • Poisson Distribution Table
      • Cumulative Poisson Distribution Table
    • Six Sigma Diagrams >
      • Choosing a Right Parametric Test
      • Choosing a Right Control Chart
      • Commonly Used Lean Six Sigma Flowchart Symbols
      • ​Ishikawa (Fishbone) Diagram
      • Histogram
      • Scatterplot
      • Check Sheet
      • Failure Mode and Effects Analysis (FMEA)
    • Lean Six Sigma Belt Roles and Responsibilities
    • 5S
    • How to get six sigma certified?
    • International Six Sigma Certification Association (IASSC) Exam Reference Document
    • Useful Websites and Tools
    • 10 Best Free Udemy Courses That You Can Take Online
    • 5 Best Udemy Courses You Can Take Today
    • The Complete Web Developer Course 2.0 You Can Take Online | Udemy
    • 12 Best Probability and Statistics Online Courses and Classes [2018 Guide]
    • 15 Best Data Science Degrees, Courses and Certifications [2018]
  • Six Sigma Glossary
    • 5 Whys
    • Analytical and Descriptive Statistics
    • Brainstorming
    • Cost Of Quality
    • Design for Six Sigma (DFSS)
    • Efficiency of Estimators
    • Process Maps and Flow Charts
    • Gap Analysis
    • Common & Special Cause Variation
    • Quality Function Deployment (QFD)
    • In Control Process
    • Interest-Based Bargaining
    • Internal Customer
    • ISO9000
    • Kaizen Blitz
    • Kanban
    • Kano Model
    • Key Performance Indicators (KPI)
    • Lean Production
    • Management Strategies
    • MANOVA
    • Multivariate Analysis
    • Pareto Charts
    • Pareto Principle
    • PEST Analysis
    • Porter's Five Forces Analysis
    • Factor Analysis
    • Procedures
    • Process
    • Project Charter
    • Project Sponsor
    • Pull Production System
    • QS9000
    • Random Sampling
    • Failure Mode & Effects Analysis (FMEA)
    • Rolled Throughput Yield
    • Root Cause Analysis
    • Scenario Planning
    • Seven Quality Tools
    • SIPOC Diagrams
    • Six Sigma
    • SWOT Analysis
    • Systematic Sampling
    • System (Quality System)
    • Team Tools
    • Theory of Constraints
    • Throughput
    • Total Productive Maintenance (TPM)
    • Touch Time
    • Value Stream Maps
    • Visual Factory
    • Work In Progress (WIP)
    • Work In Queue
    • Work Instructions
    • Big Y
    • Control Plan
    • Waste
    • Evolutionary Operation of Processes (EVOP)
    • Cause & Effect Diagrams
    • 5C
    • 5Z
    • Project Selection
    • 8D Process
    • Appraisal Cost
    • Audit
    • Baseline
    • Business Process Quality Management
    • Check Sheet
    • Unintended Consequences
    • Voice Of The Customer (VOC)
    • Critical to Customer (CTC)
    • Critical To Quality (CTQ)
    • Customer Focus
    • Efficiency
    • Empowerment
    • Entry Criteria
    • Exit Criteria
    • Voice Of The Process (VOP)
    • Just In Time (JIT) Manufacturing
    • KISS
    • DMAIC
  • Six Sigma Blog
  • Forum
  • About Me
  • Privacy Policy
  • Contact
  • Top Free Online Courses With Printable Certificates
Picture

Join a Study Group on Facebook

Lean Six Sigma Certification Exam Preparation Guide based on ASQ Black Belt Body of Knowledge

Tweet
If you are planning to take a Lean Six Sigma Black Belt exam and researched internet and realized that Six Sigma certification training courses are too pricey and study materials are not within your budget either, then HERE is a Solution. I would like to share this free lean six sigma training guide which will help you prepare for American Society for Quality (ASQ) Lean Six Sigma Certification Exam. The six sigma training guide below includes links covering ASQ version of Lean Six Sigma Body of Knowledge. Good Luck!
This guide will help ASQ Lean Six Sigma Black Belt candidates prepare for a certification exam for FREE. Although this guide is based on the ASQ Lean Six Sigma Black Belt BOK, it will still be useful for candidates seeking lower belt (green belt, yellow belt) certifications.

About American  Society for Quality

ASQ (American Society for Quality) is a global community of people dedicated to quality who share the ideas and tools that make our world work better. With individual and organizational members around the world, ASQ has the reputation and reach to bring together the diverse quality champions who are transforming the world’s corporations, organizations and communities to meet tomorrow’s critical challenges.

ASQ provides the quality community with training, professional certifications, and knowledge to a vast network of members of the global quality community. Headquartered in Milwaukee, Wisconsin, USA, ASQ champions people passionate about quality in more than 150 countries. ASQ Global operates National Service Centers in India, China, and Mexico, and has a regional service center in the United Arab Emirates, serving the Middle East and North Africa region. ASQ’s global offices provide local access to the quality community, career development, credentials, knowledge, and information services. 

ASQ Lean Six Sigma Training Guide

I. Enterprise-Wide Deployment
 
A. Enterprise-wide view
1. History of continuous improvement
Describe the origins of continuous improvement and its impact on other improvement models. (Remember)
  • General History of Six Sigma
  • //www.sixsigmatrainingfree.com/general-history-of-six-sigma--continuous-improvement.html 
  • http://www.sixsigmainstitute.com/sixsigma/index_6sigma.shtml 

2. Value and foundations of Six Sigma
Describe the value of Six Sigma, its philosophy, history and goals. (Understand)
  • https://en.wikipedia.org/wiki/Six_Sigma 
  • http://www.dummies.com/how-to/content/six-sigma-for-dummies-cheat-sheet.html 
  • http://www.skymark.com/resources/methods/sixsigmaquality.asp 

3. Value and foundations of Lean
Describe the value of Lean, its philosophy, history and goals. (Understand)
  • http://www.strategosinc.com/just_in_time.htm 
  • http://en.wikipedia.org/wiki/Lean_manufacturing 
  • http://leanmanufacturingtools.org/39/lean-thinking-lean-principles/ 

4. Integration of Lean and Six Sigma
Describe the relationship between Lean and Six Sigma. (Understand)
  • http://www.beyondlean.com/lean-six-sigma.html 
  • http://en.wikipedia.org/wiki/Lean_Six_Sigma
 
5. Business processes and systems 
Describe the relationship among various business processes (design, production, purchasing, accounting, sales, etc.) and the impact these relationships can have on business systems. (Understand)
  • http://www.thecqi.org/Documents/community/South%20Western/Wessex%20Branch/Systems%20and%20Processes%20article%20by%20David%20Hoyle%20Oct09%20(2).pdf 

6. Six sigma and Lean applications
Describe how these tools are applied to processes in all types of enterprises: manufacturing, service, transactional, product and process design, innovation, etc. (Understand)
  • http://www.utsi.edu/events/thursdayhandouts.pdf
  • http://asq.org/pub/sixsigma/past/vol2_issue1/youropinion.html​

B. Leadership
1. Enterprise leadership responsibilities
Describe the responsibilities of executive leaders and how they affect the deployment of Six Sigma in terms of providing resources, managing change, communicating ideas, etc. (Understand)
  • http://www.isixsigma.com/new-to-six-sigma/roles-responsibilities/six-sigma-roles-and-responsibilities/
  • http://www.sixsigmahelp.com/what-does-executive-leaders-champions-master-black-belt-green-belts-and-black-belts-mean-in-six-sigma/

2. Organizational roadblocks
Describe the impact an organization’s culture and inherent structure can have on the success of Six Sigma, and how deployment failure can result from the lack of resources, management support, etc.; identify and apply various techniques to overcome these barriers. (Apply)
  • http://blog.simplilearn.com/quality-management/organizational-roadblocks-to-lean-six-sigma-how-to-deal-with-them 
  • http://www.sixsigmaonline.org/six-sigma-training-certification-information/articles/common-six-sigma-roadblocks-business-enterprises-experience.html 
  • http://books.google.com/books?id=15SElVp2NokC&pg=PA113&lpg=PA113&dq=organizational+roadblocks+six+sigma&source=bl&ots=vsq02FSe08&sig=Iwh-WL1HPba4ATCGI70cH-MIN88&hl=en&sa=X&ei=P7_OU_X4K8SUyATfm4CACg&ved=0CGgQ6AEwCQ#v=onepage&q=organizational%20roadblocks%20six%20sigma&f=false (p.112)
  • http://www.isixsigma.com/new-to-six-sigma/roles-responsibilities/champions-role-successful-six-sigma-deployments/ 

3. Change management
Describe and use various techniques for facilitating and managing organizational change. (Apply)
  • http://www.lce.com/All_Aboard_LeanSix_Sigma_is_a_journey_best_travelled_with_change_management_561-item.html 

4. Six Sigma projects and kaizen events 
Describe how projects and kaizen events are selected, when to use Six Sigma instead of other problem-solving approaches, and the importance of aligning their objectives with organizational goals. (Apply)
  • Kaizen and Kaizen Blitz
  • https://www.iienet2.org/uploadedfiles/Webcasts/KaizenPIDWebinar050410.pdf 

5. Six Sigma roles and responsibilities
Describe the roles and responsibilities of Six Sigma participants: black belt, master black belt, green belt, champion, process owners and project sponsors. (Understand)
  • //www.sixsigmatrainingfree.com/lean-six-sigma-belt-roles-and-responsibilities.html 
II. Organizational Process Management and Measures [9 Questions]

A. Impact on stakeholders 
Describe the impact Six Sigma projects can have on customers, suppliers and other stakeholders. (Understand)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA22&lpg=PA22&dq=impact+of+six+sigma+projects+on+stakeholders&source=bl&ots=vdV8tIyQGK&sig=8dGXIbf6ixqnegLbLrxhVdd0-Y0&hl=en&sa=X&ei=lMTOU7v2L4idyATkhIHACA&ved=0CCUQ6AEwAQ#v=onepage&q=impact%20of%20six%20sigma%20projects%20on%20stakeholders&f=false 

B. Critical to x (CTx) requirements 
Define and describe various CTx requirements (critical to quality (CTQ), cost (CTC), process (CTP), safety (CTS), delivery (CTD), etc.) and the importance of aligning projects with those requirements. (Apply)
  • http://www.visionraval.com/six-sigma-critical-to-x-overview/ 
  • http://www.isixsigma.com/dictionary/critical-to-quality-ctq/ 

C. Benchmarking
Define and distinguish between various types of benchmarking, including best practices, competitive, collaborative, etc. (Apply)
  • http://www.isixsigma.com/methodology/benchmarking/understanding-purpose-and-use-benchmarking/ 
  • http://www.slideshare.net/guestbd4baa8/six-sigma-benchmarking 

D. Business performance measures 
Define and describe various business performance measures, including balanced scorecard, key performance indicators (KPIs), the financial impact of customer loyalty, etc. (Understand)
  • http://www.angoss.com/wp-content/uploads/2011/05/Key_Performance_Indicators_Six_Sigma_and_Data_Mining.pdf 
  • http://www.qualitydigest.com/mar07/articles/04_article.shtml 
  • http://www.sixsigmaonline.org/six-sigma-training-certification-information/articles/six-sigma-customer-satisfaction-and-loyalty.html 
  • http://www.sixsigmaonline.org/six-sigma-training-certification-information/articles/tips-for-creating-key-performance-indicators.html 
  • http://hbr.org/2007/07/using-the-balanced-scorecard-as-a-strategic-management-system/ar/1 (Balanced scorecard)
  • http://balancedscorecard.org/Resources/AbouttheBalancedScorecard/tabid/55/Default.aspx (Balanced scorecard)
  • http://en.wikipedia.org/wiki/Balanced_scorecard (Balanced scorecard)

E. Financial measures 
Define and use financial measures, including revenue growth, market share, margin, cost of quality (COQ), net present value (NPV), return on investment (ROI), cost-benefit analysis, etc. (Apply)
  • http://www.managementstudyguide.com/measuring-financial-benefits-of-six-sigma.htm
  • http://www.mathsisfun.com/money/net-present-value.html (PV, FV and NPV)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA32&lpg=PA32&dq=financial+measures+roi+npv+margin+six+sigma&source=bl&ots=vc02tFvRED&sig=41AyTeGBGBLrcnVdJiVHqtV2KrE&hl=en&sa=X&ei=9vKoUe0LkajQAcaxgKAH&ved=0CDIQ6AEwAQ#v=onepage&q=financial%20measures%20roi%20npv%20margin%20six%20sigma&f=false
  • http://www.mathsisfun.com/money/net-present-value.html (PV, FV and NPV)
III. Team Management [16 Questions]

A. Team formation
1. Team types and constraints
Define and describe various types of teams (e.g., formal, informal, virtual, cross-functional, self-directed, etc.), and determine what team model will work best for a given situation. Identify constraining factors including geography, technology, schedules, etc. (Apply)
  • http://www.managementstudyguide.com/types-of-teams.htm 
  • http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false 

2. Team roles 
Define and describe various team roles and responsibilities, including leader, facilitator, coach, individual member, etc. (Understand)
  • http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false (p.76)

3. Team member selection
Define and describe various factors that influence the selection of team members, including required skills sets, subject matter expertise, availability, etc. (Apply)
  • http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false (p.78)

4. Launching teams
Identify and describe the elements required for launching a team, including having management support, establishing clear goals, ground rules and timelines, and how these elements can affect the team’s success. (Apply)
  • http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false (p.80)

B. Team facilitation
1. Team motivation 
Describe and apply techniques that motivate team members and support and sustain their participation and commitment. (Apply)
  • http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false (p.84)

2. Team stages
Facilitate the team through the classic stages of development: forming, storming, norming, performing and adjourning. (Apply)
  • http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false (p.86)
  • http://www.projectsmart.co.uk/the-five-stages-of-team-development-a-case-study.php 
  • http://www.isixsigma.com/implementation/teams/success-development-stages-six-sigma-teams/ 
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA43&lpg=PA43&dq=team+stages+forming+norming+six+sigma&source=bl&ots=vdV8tJqMCG&sig=cBkHsMrvtlkflJRX9hTZWRsaaKo&hl=en&sa=X&ei=qcrOU-fvHMmbyATBjYDYCQ&ved=0CEsQ6AEwCA#v=onepage&q=team%20stages%20forming%20norming%20six%20sigma&f=false 

3. Team communication       
Identify and use appropriate communication methods (both within the team and from the team to various stakeholders) to report progress, conduct milestone reviews and support the overall success of the project. (Apply)
  • ​http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false (p.88)

C. Team dynamics
Identify and use various techniques (e.g., coaching, mentoring, intervention, etc.) to overcome various group dynamic challenges, including overbearing/dominant or reluctant participants, feuding and other forms of unproductive disagreement, unquestioned acceptance of opinions as facts, groupthink, floundering, rushing to accomplish or finish, digressions, tangents, etc. (Evaluate)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA46&lpg=PA46&dq=team+dynamics+six+sigma+overbearing+dominant+reluctant&source=bl&ots=vdV8tJqNJK&sig=IK3xZ2EM1YqF9lGBoF7fiN9qOOg&hl=en&sa=X&ei=V8vOU-HHHoWXyAS9x4G4AQ&ved=0CC0Q6AEwAg#v=onepage&q=team%20dynamics%20six%20sigma%20overbearing%20dominant%20reluctant&f=false 
  • http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false (p.92-96)
  • http://www.mindtools.com/pages/article/improving-group-dynamics.htm 
  • http://www1.wfh.org/publication/files/pdf-1245.pdf 
  • http://pattan.net-website.s3.amazonaws.com/images/2014/01/28/04_Tyree_7_of_7.pdf (Ten common group problems)

D. Time management for teams
Select and use various time management techniques including publishing agendas with time limits on each entry, adhering to the agenda, requiring pre-work by attendees, ensuring that the right people and resources are available, etc. (Apply)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA46&lpg=PA46&dq=team+dynamics+six+sigma+overbearing+dominant+reluctant&source=bl&ots=vdV8tJqNJK&sig=IK3xZ2EM1YqF9lGBoF7fiN9qOOg&hl=en&sa=X&ei=V8vOU-HHHoWXyAS9x4G4AQ&ved=0CC0Q6AEwAg#v=onepage&q=team%20dynamics%20six%20sigma%20overbearing%20dominant%20reluctant&f=false (p.49)
  • http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false (p.99)

E. Team decision-making tools
Define, select and use tools such as brainstorming, nominal group technique, multi-voting, etc. (Apply)
  • http://books.google.com/books?id=m9e80acjz4oC&pg=PA74&lpg=PA74&dq=various+types+of+teams+six+sigma+formal+informal+virtual&source=bl&ots=uVGdy_wnNt&sig=9VLT3Ep1ZjQbnjTff2wRaRmdLZc&hl=en&sa=X&ei=RMnOU7y7JoifyASL7oFI&ved=0CCkQ6AEwAg#v=onepage&q=various%20types%20of%20teams%20six%20sigma%20formal%20informal%20virtual&f=false (p.112)
  • http://www.mindtools.com/brainstm.html (Brain-storming)
  • http://www.sswm.info/category/planning-process-tools/decision-making/decision-making-tools/deciding-community/nominal-gro (Nominal group technique)
  • http://asq.org/learn-about-quality/decision-making-tools/overview/multivoting.html (Multi-voting)

F. Management and planning tools 
Define, select and apply the following tools: affinity diagrams, tree diagrams, process decision program charts (PDPC), matrix diagrams, interrelationship digraphs, prioritization matrices and activity network diagrams. (Apply)
  • http://asq.org/learn-about-quality/new-management-planning-tools/overview/overview.html (Seven New Management and Planning Tools in Six Sigma)
  • http://www.whatissixsigma.net/seven-management-planning-tools/ (Seven New Management and Planning Tools in Six Sigma)
  • http://en.wikipedia.org/wiki/Seven_Management_and_Planning_Tools (Seven New Management and Planning Tools in Six Sigma)
  • http://asq.org/healthcare-use/links-resources/affinity-diagram-example.html (Affinity diagram/KJ method)
  • http://asq.org/learn-about-quality/new-management-planning-tools/overview/tree-diagram.html (Tree diagram)
  • http://asq.org/learn-about-quality/new-management-planning-tools/overview/process-decision-program-chart.html (process decision program charts (PDPC))
  • http://asq.org/learn-about-quality/new-management-planning-tools/overview/matrix-diagram.html (Matrix Diagram)
  • http://asq.org/learn-about-quality/new-management-planning-tools/overview/relations-diagram.html (Relations Diagram or Digraph)
  • http://asq.org/learn-about-quality/new-management-planning-tools/overview/arrow-diagram.html (Arrow Diagram)

G. Team performance evaluation and reward 
Measure team progress in relation to goals, objectives and other metrics that support team success and reward and recognize the team for its accomplishments. (Analyze)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA58&lpg=PA58&dq=Team+performance+evaluation+and+reward+six+sigma&source=bl&ots=vdV8uHxNDJ&sig=aqV5Mj1kwOnmPpuuTuuXbuefjsw&hl=en&sa=X&ei=8R7QU-b0O9GKyASY04AQ&ved=0CC8Q6AEwAg#v=onepage&q=Team%20performance%20evaluation%20and%20reward%20six%20sigma&f=false 
IV. Define [15 Questions]

A. Voice of the customer
1. Customer identification
Segment customers for each project and show how the project will impact both internal and external customers. (Apply)
  • http://www.six-sigma-material.com/Voice-of-the-Customer.html 
  • http://www.isixsigma.com/methodology/voc-customer-focus/voice-customer-have-you-asked-enough-questions/ 
  • http://www.slideshare.net/satya_yudha/voc-yudha 

2. Customer feedback
Identify and select the appropriate data collection method (surveys, focus groups, interviews, observation, etc.) to gather customer feedback to better understand customer needs, expectations and requirements. Ensure that the instruments used are reviewed for validity and reliability to avoid introducing bias or ambiguity in the responses. (Apply)
  • http://www.isixsigma.com/methodology/voc-customer-focus/choosing-best-method-listening-customer/ 
  • http://www.isixsigma.com/methodology/voc-customer-focus/turning-customer-data-critical-satisfaction-data/ 

3. Customer requirements   
Define, select and use appropriate tools to determine customer requirements, such as CTQ flow-down, quality function deployment (QFD) and the Kano model. (Apply)
  • http://www.micquality.com/six_sigma_glossary/ctq_flowdown.htm (CTQ flow-down/tree)
  • http://www.mindtools.com/pages/article/ctq-trees.htm (CTQ flow-down/tree)
  • http://video.mit.edu/watch/lecture-4-quality-function-deployment-qfd-and-house-of-quality-12209/ (Quality Function Deployment_video)
  • http://asq.org/learn-about-quality/qfd-quality-function-deployment/overview/kano-model.html (Kano Model)

B. Project charter
1. Problem statement
Develop and evaluate the problem statement in relation to the project’s baseline performance and improvement goals. (Create)
  • http://www.managementstudyguide.com/defining-project-problem-statement.htm 

2. Project scope
Develop and review project boundaries to ensure that the project has value to the customer. (Analyze)
  • http://www.managementstudyguide.com/defining-scope-of-project.htm 

3. Goals and objectives 
Develop the goals and objectives for the project on the basis of the problem statement and scope. (Apply)
  • http://sites.ed.gov/aapi/files/2015/08/Grant-Writing-Training-Manual.pdf

4. Project performance measures 
Identify and evaluate performance measurements (e.g., cost, revenue, schedule, etc.) that connect critical elements of the process to key outputs. (Analyze)
  • http://staceybarr.com/measure-up/7-essential-project-performance-measures/

C. Project tracking 
Identify, develop and use project management tools, such as schedules, Gantt charts, toll-gate reviews, etc., to track project progress. (Create)
  • https://www.projectsmart.co.uk/project-management-six-sigma-project-management.php
  • http://www.qualitydigest.com/aug05/articles/05_article.shtml
  • http://www.opia.psu.edu/sites/default/files/insights024.pdf
  • http://www.umsl.edu/~sauterv/analysis/488_f02_papers/ProjMgmt.html
  • https://www.mindtools.com/pages/article/newPPM_03.htm
  • http://www.brighthubpm.com/six-sigma/52721-explaining-tollgate-reviews/
V. Measure [26 Questions]

A. Process characteristics
1. Input and output variables 
Identify these process variables and evaluate their relationships using SIPOC and other tools. (Evaluate)
  • http://books.google.com/books?id=JZzMnkpU3FAC&pg=PA2&lpg=PA2&dq=input+and+output+variables+six+sigma&source=bl&ots=fGAUUvc0gx&sig=WieynAQ1ywcjUPq_zLgpZ9WqMNc&hl=en&sa=X&ei=7IeQU8COHPDMsQTxy4LgBw&ved=0CCoQ6AEwAQ#v=onepage&q=input%20and%20output%20variables%20six%20sigma&f=false 
  • http://asq.org/service/body-of-knowledge/tools-sipoc (Sipoc)
  • http://en.wikipedia.org/wiki/Ishikawa_diagram (Ishikawa / Fishbone diagram) 
  • http://books.google.com/books?id=Yi7wpnL6kh0C&pg=PA92&lpg=PA92&dq=xy+matrix+diagram+six+sigma&source=bl&ots=boQQ3c0EAD&sig=yKMP5flZbwjfFl2JeV_uuRPR6Sk&hl=en&sa=X&ei=s3RtUbuOHofe4AP8ooC4Bw&sqi=2&ved=0CFsQ6AEwBw#v=onepage&q=xy%20matrix%20diagram%20six%20sigma&f=false (XY Matrix) 
  • http://www.six-sigma-material.com/Correlation-Matrix.html (Cause and Effect Matrix)

2. Process flow metrics 
Evaluate process flow and utilization to identify waste and constraints by analyzing work in progress (WIP), work in queue (WIQ), touch time, takt time, cycle time, throughput, etc. (Evaluate)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA82&lpg=PA82&dq=wip+wiq+touch+time+takt+time&source=bl&ots=vdV3CLsPIJ&sig=N_PRWEKIHBsBRw0CSDrKcImMYNY&hl=en&sa=X&ei=ZJKQU9lBruKwBKeBgtAF&ved=0CCAQ6AEwAA#v=onepage&q=wip%20wiq%20touch%20time%20takt%20time&f=false 

3. Process analysis tools
Analyze processes by developing and using value stream maps, process maps, flowcharts, procedures, work instructions, spaghetti diagrams, circle diagrams, etc. (Analyze)
  • http://www.nwlean.net/toolsCD/VSM/4%20steps%20to%20VSM.pdf (Value Stream Maps)
  • http://www.six-sigma-material.com/Process-Maps.html (Process Map)
  • http://www.dummies.com/how-to/content/how-to-break-down-process-flow-for-a-six-sigma-ini.html (Process mapping)
  • //www.sixsigmatrainingfree.com/commonly-used-lean-six-sigma-flowchart-symbols.html (Flowchart symbols)
  • http://www.breezetree.com/article-excel-flowchart-shapes.htm (Flowchart symbols)
  • https://www.moresteam.com/toolbox/value-added-flow-chart.cfm (Value Added Flowchart)
  • http://www2.bgsu.edu/colleges/technology/faculty/sinn/LSSQTT%20Tool%2017.pdf (Procedures / SOP)
  • http://www.sixsigmatraining.org/lean-six-sigma/lean-six-sigma-improvement-and-work-design-part-4.html (Work Instructions)
  • http://www.systems2win.com/solutions/jobInstructions.htm (Work Instructions)
  • http://asq.org/learn-about-quality/process-analysis-tools/overview/spaghetti-diagram.html (Spaghetti Diagram)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA82&lpg=PA82&dq=wip+wiq+touch+time+takt+time&source=bl&ots=vdV3CLsPIJ&sig=N_PRWEKIHBsBRw0CSDrKcImMYNY&hl=en&sa=X&ei=ZJKQU9lBruKwBKeBgtAF&ved=0CCAQ6AEwAA#v=onepage&q=wip%20wiq%20touch%20time%20takt%20time&f=false (Circle Diagram p.89)

B. Data collection
1. Types of data
Define, classify and evaluate qualitative and quantitative data, continuous (variables) and discrete (attributes) data and convert attributes data to variables measures when appropriate. (Evaluate)
  • http://www.six-sigma-material.com/Data-Classification.html 
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA82&lpg=PA82&dq=wip+wiq+touch+time+takt+time&source=bl&ots=vdV3CLsPIJ&sig=N_PRWEKIHBsBRw0CSDrKcImMYNY&hl=en&sa=X&ei=ZJKQU9lBruKwBKeBgtAF&ved=0CCAQ6AEwAA#v=onepage&q=wip%20wiq%20touch%20time%20takt%20time&f=false (p. 90-91)

2. Measurement scales
Define and apply nominal, ordinal, interval and ratio measurement scales. (Apply)
  • http://www.six-sigma-material.com/Data-Classification.html 
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA82&lpg=PA82&dq=wip+wiq+touch+time+takt+time&source=bl&ots=vdV3CLsPIJ&sig=N_PRWEKIHBsBRw0CSDrKcImMYNY&hl=en&sa=X&ei=ZJKQU9lBruKwBKeBgtAF&ved=0CCAQ6AEwAA#v=onepage&q=wip%20wiq%20touch%20time%20takt%20time&f=false (p. 90-91)

3. Sampling methods 
Define and apply the concepts related to sampling (e.g., representative selection, homogeneity, bias, etc.). Select and use appropriate sampling methods (e.g., random sampling, stratified sampling, systematic sampling, etc.) that ensure the integrity of data. (Evaluate)
  • http://www.six-sigma-material.com/Samples.html 
  • http://www.micquality.com/six_sigma_glossary/sampling_methods.htm 
  • http://www.isixsigma.com/tools-templates/sampling-data/how-determine-sample-size-determining-sample-size/ 
  • http://www.isixsigma.com/tools-templates/sampling-data/basic-sampling-strategies-sample-vs-population-data/ 
  • http://changingminds.org/explanations/research/sampling/choosing_sampling.htm 
  • http://www.ssc.wisc.edu/~jraymo/links/soc357/class8_F09.pdf 
  • http://psychology.ucdavis.edu/faculty_sites/sommerb/sommerdemo/sampling/types.htm 
  • http://www.micquality.com/six_sigma_glossary/bias.htm (Bias)
  • http://www.sixsigmadaily.com/terms/inferential-statistics (Inferential Statistics)
  • https://en.wikipedia.org/wiki/Homogeneity_(statistics)

4. Collecting data
Develop data collection plans, including consideration of how the data will be collected (e.g., check sheets, data coding techniques, automated data collection, etc.) and how it will be used. (Apply)
  • http://www.six-sigma-material.com/Data-Collection.html
  • https://www.isixsigma.com/tools-templates/sampling-data/building-sound-data-collection-plan/ 

C. Measurement systems
1. Measurement methods
Define and describe measurement methods for both continuous and discrete data. (Understand)
  • https://www.isixsigma.com/tools-templates/measurement-systems-analysis-msa-gage-rr/challenges-discrete-and-attribute-data-measurement/

2. Measurement systems analysis
Use various analytical methods (e.g., repeatability and reproducibility (R&R), correlation, bias, linearity, precision to tolerance, percent agreement, etc.) to analyze and interpret measurement system capability for variables and attributes measurement systems. (Evaluate)
  • https://www.moresteam.com/toolbox/measurement-system-analysis.cfm
  • http://world-class-quality.com/images/article/20081125225625_MSA%20QW%20Dec06%20article.pdf
  • http://www.pdfsixsigma.com/support-files/2.3.4_Variable_and_Attribute_MSA.pdf
  • http://www.conceptmachine.com/files/zeiss/GR&R%20Studies.pdf
  • http://www.micquality.com/six_sigma_glossary/precision_tolerance_ratio.htm (P/T)
  • http://www.qualitytrainingportal.com/resources/msa/attribute_measurements.htm
  • http://www.miconleansixsigma.com/kappa-statistic.html (Kappa)

3. Measurement systems in the enterprise
Identify how measurement systems can be applied in marketing, sales, engineering, research and development (R&D), supply chain management, customer satisfaction and other functional areas. (Understand)
  • https://books.google.com/books?id=yL7MBbUbKQQC&pg=PA118&lpg=PA118&dq=Measurement+systems+in+the+enterprise+six+sigma&source=bl&ots=vd06CExLAF&sig=WVzvehifpi9pgV1zv977RTuNTfg&hl=en&sa=X&ved=0ahUKEwjYj7GN4q3PAhWD6yYKHfHjApoQ6AEIMjAE#v=onepage&q=Measurement%20systems%20in%20the%20enterprise%20six%20sigma&f=false

4. Metrology
Define and describe elements of metrology, including calibration systems, traceability to reference standards, the control and integrity of standards and measurement devices, etc. (Understand)
  • https://books.google.com/books?id=k6Ztz1AwlegC&pg=PA524&lpg=PA524&dq=metrology+six+sigma&source=bl&ots=X7bywiuw9P&sig=5sSOG348AOUY8T33Sg8LF3fizMI&hl=en&sa=X&ved=0ahUKEwiH2PO_4q3PAhWCQSYKHWsCDwkQ6AEILDAD#v=onepage&q=metrology%20six%20sigma&f=false​

D. Basic statistics
1. Basic terms 
Define and distinguish between population parameters and sample statistics (e.g., proportion, mean, standard deviation, etc.) (Apply)
  • http://www.six-sigma-material.com/Central-Tendency.html (Measures of Central Tendency)
  • http://www.six-sigma-material.com/Measures-of-Dispersion.html (Measures of Dispersion)
  • http://bobhall.tamu.edu/FiniteMath/Module8/Introduction.html (Basic Statistics Terms)
  • http://stattrek.com/sampling/populations-and-samples.aspx (Population vs sample)
  • http://www.mathsisfun.com/algebra/proportions.html (Proportions)

2. Central limit theorem 
Describe and use this theorem and apply the sampling distribution of the mean to inferential statistics for confidence intervals, control charts, etc. (Apply)
  • Central Limit Theorem
  • http://www.micquality.com/six_sigma_glossary/central_limit_theorem.htm 
  • http://blog.minitab.com/blog/michelle-paret/explaining-the-central-limit-theorem-with-bunnies-and-dragons-v2
  • http://www.dummies.com/how-to/content/how-to-use-the-central-limit-theorem-for-six-sigma.html 

3. Descriptive statistics
Calculate and interpret measures of dispersion and central tendency and construct and interpret frequency distributions and cumulative frequency distributions. (Evaluate)
  • http://www.yale.edu/ynhti/curriculum/units/1986/5/86.05.03.x.html 
  • http://www.statcan.gc.ca/edu/power-pouvoir/ch8/5214814-eng.htm (Frequency and cumulative frequency distributions)

4. Graphical methods
Construct and interpret diagrams and charts, including box-and-whisker plots, run charts, scatter diagrams, histograms, normal probability plots, etc. (Evaluate)
  • http://www.skymark.com/resources/tools/management_tools.asp 
  • http://www.regentsprep.org/regents/math/algebra/ad3/boxwhisk.htm (Box -and-whisker plot)
  • http://www.micquality.com/six_sigma_glossary/run_charts.htm (Run Charts)
  • http://www.dummies.com/how-to/content/how-to-draw-correlations-from-scatter-plots-in-six.html (Scatter Diagram)
  • https://www.moresteam.com/toolbox/histogram.cfm (Histogram)
  • http://www.skymark.com/resources/tools/normal_test_plot.asp (Normal Probability Plot)
  • http://www.processma.com/resource/graphical_analysis.php (Various Graphs) 
  • ​http://realleansixsigmaquality.com/cms/images/ch3svol1.pdf (Six sigma charts and graphs)

5. Valid statistical conclusions
Define and distinguish between enumerative (descriptive) and analytic (inferential) statistical studies and evaluate their results to draw valid conclusions. (Evaluate)
  • https://statistics.laerd.com/statistical-guides/descriptive-inferential-statistics.php (Descriptive and Inferential Statistics)

E. Probability
1. Basic concepts
Describe and apply probability concepts such as independence, mutually exclusive events, multiplication rules, complementary probability, joint occurrence of events, etc. (Apply)
  • http://www.discover6sigma.org/post/2005/09/basic-probability-theory/ 
  • http://www.cliffsnotes.com/math/statistics/probability/classic-theory 
  • http://onlinestatbook.com/2/probability/basic.html 
  • http://www-math.bgsu.edu/~albert/m115/probability/outline.html 
  • http://www.mathsisfun.com/data/probability.html (What is probability?)
  • http://www.mathsisfun.com/data/probability-events-types.html (Probability Events)
  • http://www.mathsisfun.com/data/probability-complement.html (Complementary Probability)
  • https://www.khanacademy.org/math/probability/independent-dependent-probability 

2. Commonly used distributions 
Describe, apply and interpret the following distributions: normal, Poisson, binomial, chi square, Student’s t and F distributions. (Evaluate)
  • http://www.isixsigma.com/tools-templates/statistical-analysis/understanding-statistical-distributions-six-sigma/ 
  • http://www.micquality.com/6sigma101/glossary/continuous_distributions.htm#2 
  • http://www.six-sigma-material.com/Normal-Distribution.html (Normal distribution)
  • http://www.qimacros.com/hypothesis-test/data-normality-test/ (Normality test)
  • http://www.umass.edu/wsp/resources/poisson/ (Poisson distribution)
  • http://www.six-sigma-material.com/Binomial-Distribution.html (Binomial distribution)
  • http://people.richland.edu/james/lecture/m170/ch12-int.html (Chi squared distribution)
  • http://chisquaretable.net/ (Chi squared distribution table)
  • http://stattrek.com/probability-distributions/t-distribution.aspx (T student distribution)
  • http://people.richland.edu/james/lecture/m170/ch13-f.html (F distribution)

3. Other distributions 
Describe when and how to use the following distributions: hypergeometric, bivariate, exponential, lognormal and Weibull. (Apply)
  • http://www.six-sigma-material.com/Hypergeometric-Distribution.html (Hypergeometric distribution)
  • http://www.micquality.com/six_sigma_glossary/bivariate_distribution.htm (Bivariate distribution)
  • http://www.public.iastate.edu/~riczw/stat330s11/lecture/lec13.pdf (Exponential distribution)
  • http://www.free-six-sigma.com/lognormal-distribution.html (Lognormal distribution)
  • http://www.weibull.com/hotwire/issue14/relbasics14.htm (Weibull distribution)
  • http://www.six-sigma-material.com/Uniform-Distribution.html (Uniform distribution)
  • http://www.isixsigma.com/tools-templates/normality/tips-recognizing-and-transforming-non-normal-data/ (Non-normal distributions)

F. Process capability
1. Process capability indices
Define, select and calculate Cp and Cpk to assess process capability. (Evaluate)
  • http://www.six-sigma-material.com/Process-Capability-Indices.html 
  • http://www.processma.com/resource/capability_analysis.htm
  • http://www.isixsigma.com/tools-templates/capability-indices-process-capability/cp-cpk-pp-and-ppk-know-how-and-when-use-them/ 
  • http://www.cita.org.hk/wp-content/uploads/pms/TrainingMaterials/ProcessCapability.pdf 

2. Process performance indices
Define, select and calculate Pp, Ppk and Cpm to assess process performance. (Evaluate)
  • http://www.six-sigma-material.com/Process-Capability-Indices.html 
  • http://www.processma.com/resource/capability_analysis.htm
  • http://www.isixsigma.com/tools-templates/capability-indices-process-capability/cp-cpk-pp-and-ppk-know-how-and-when-use-them/ 
  • http://www.cita.org.hk/wp-content/uploads/pms/TrainingMaterials/ProcessCapability.pdf 

3. Short-term and long-term capability 
Describe and use appropriate assumptions and conventions when only short-term data or attributes data are available and when long-term data are available. Interpret the relationship between long-term and short-term capability. (Evaluate)
  • http://www.dummies.com/how-to/content/short-and-long-term-capability-indices-for-six-sig.html 
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA173&lpg=PA173&dq=3.+Short-term+and+long-term+capability+Describe+and+use+appropriate+assumptions+and+conventions+when+only+short-term+data+or+attributes+data+are+available+and+when+long-term+data+are+available.+Interpret+the+relationship+between+long-term+and+short-term+capability.+(Evaluate)&source=bl&ots=vdV9vJuSIF&sig=FHwQ_6zywEPEVGk8_Kw8yPVyUFo&hl=en&sa=X&ei=WyzhU7SbOM6YyASa4oDABw&ved=0CB8Q6AEwAA#v=onepage&q=3.%20Short-term%20and%20long-term%20capability%20Describe%20and%20use%20appropriate%20assumptions%20and%20conventions%20when%20only%20short-term%20data%20or%20attributes%20data%20are%20available%20and%20when%20long-term%20data%20are%20available.%20Interpret%20the%20relationship%20between%20long-term%20and%20short-term%20capability.%20(Evaluate)&f=false 
  • http://www.cita.org.hk/wp-content/uploads/pms/TrainingMaterials/ProcessCapability.pdf 

4. Process capability for non-normal data
Identify non-normal data and determine when it is appropriate to use Box-Cox or other transformation techniques. (Apply)
  • http://www.isixsigma.com/tools-templates/capability-indices-process-capability/process-capability-calculations-non-normal-data/ 
  • http://www.isixsigma.com/tools-templates/normality/tips-recognizing-and-transforming-non-normal-data/ 

5. Process capability for attributes data
Calculate the process capability and process sigma level for attributes data. (Apply)
  • http://asqdallas.org/wp-content/uploads/2012/12/AdvProcessCapability-V2.pdf 

6. Process capability studies
Describe and apply elements of designing and conducting process capability studies, including identifying characteristics and specifications, developing sampling plans and verifying stability and normality. (Evaluate)
  • https://qualityamerica.com/knowledgecenter/statisticalprocesscontrol/how_to_perform_a_process_capability_study.asp 
  • http://www.qimacros.com/lean-six-sigma-articles/stability-analysis-vs-capability-analysis/ (Stability)
  • http://statisticaloutsourcingservices.com/Capability.pdf 

7. Process performance vs. specification
Distinguish between natural process limits and specification limits, and calculate process performance metrics such as percent defective, parts per million (PPM), defects per million opportunities (DPMO), defects per unit (DPU), process sigma, rolled throughput yield (RTY), etc. (Evaluate)
  • Basic Lean Six Sigma Metrics

Read more:
  • http://asq.org/quality-progress/2009/08/34-per-million/perusing-process-performance-metrics.html 
VI. Analyze [24 Questions]

A.Measuring and modeling relationships between variables
1. Correlation coefficient
Calculate and interpret the correlation coefficient and its confidence interval, and describe the difference between correlation and causation. (Analyze) 
NOTE: Serial correlation will not be tested.
  • http://www.cliffsnotes.com/math/statistics/bivariate-relationships/correlation 

2. Regression
Calculate and interpret regression analysis, and apply and interpret hypothesis tests for regression statistics. Use the regression model for estimation and prediction, analyze the uncertainty in the estimate, and perform a residuals analysis to validate the model. (Evaluate) 
NOTE: Models that have non-linear parameters will not be tested.
  • http://www.cliffsnotes.com/math/statistics/bivariate-relationships/simple-linear-regression 

3. Multivariate tools
Use and interpret multivariate tools such as principal components, factor analysis, discriminant analysis, multiple analysis of variance (MANOVA), etc., to investigate sources of variation. (Analyze)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA197&lpg=PA197&dq=six+sigma+multivariate+tools+principal+components&source=bl&ots=vdV8tJpLHI&sig=iKfX7KzRHKhz4--YlzUsDXnTpKc&hl=en&sa=X&ei=kcbOU9nGI4yVyATUh4L4Ag&ved=0CDUQ6AEwAw#v=onepage&q=six%20sigma%20multivariate%20tools%20principal%20components&f=false 
  • http://www.micquality.com/six_sigma_glossary/multivariate_analysis.htm 

4. Multi-vari studies
Use and interpret charts of these studies and determine the difference between positional, cyclical and temporal variation. (Analyze)
  • http://www.sixsigmaonline.org/Flash_Videos/Supplemental/Printable/08_multivari.pdf 

5. Attributes data analysis
Analyze attributes data using logit, probit, logistic regression, etc., to investigate sources of variation. (Analyze)
  • ​http://en.wikipedia.org/wiki/Logistic_regression (Logistic Regression)
  • http://www.sjsu.edu/people/james.lee/courses/JS203/s1/Binary%20Logistic%20Regression%20Lecture%209.ppt (Binary Logistic Regression)
  • http://www.theanalysisfactor.com/logistic-regression-models-for-multinomial-and-ordinal-variables/ (Multinominal and Ordinal Regression)
  • http://rt.uits.iu.edu/visualization/analytics/docs/cdvm-docs/cdvm1.php (Logit vs Probit models)

B. Hypothesis testing
1. Terminology 
Define and interpret the significance level, power, type I and type II errors of statistical tests. (Evaluate)
  • https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=http%3A%2F%2Fwww.opensourcesixsigma.com%2Fv%2Fvspfiles%2Fassets%2Fimages%2Fsample%2520-%2520lss%2520black%2520belt%2520course%252010.ppt&ei=2qmwUcq0OKLE0QHlpYCIDA&usg=AFQjCNFpkDg-OUoSuzjN0ojFtU7xu8R3hA&bvm=bv.47534661,d.dmQ
  • http://www.six-sigma-material.com/Alpha-and-Beta-Risks.html (Alpha and Beta risks)
  • http://apcentral.collegeboard.com/apc/members/courses/teachers_corner/22815.html (Power 1-Beta)
  • https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=http%3A%2F%2Fwww.opensourcesixsigma.com%2Fv%2Fvspfiles%2Fassets%2Fimages%2Fsample%2520-%2520lss%2520black%2520belt%2520course%252010.ppt&ei=2qmwUcq0OKLE0QHlpYCIDA&usg=AFQjCNFpkDg-OUoSuzjN0ojFtU7xu8R3hA&bvm=bv.47534661,d.dmQ (Sampling and power)

2. Statistical vs. practical significance
Define, compare and interpret statistical and practical significance. (Evaluate)
  • http://www.dmaictools.com/dmaic-analyze/hypothesis-testing 

3. Sample size
Calculate sample size for common hypothesis tests (e.g., equality of means, equality of proportions, etc.). (Apply)
  • https://people.richland.edu/james/lecture/m170/ch08-n.html 
  • http://www.isixsigma.com/tools-templates/sampling-data/how-determine-sample-size-determining-sample-size/ 
  • http://www.itl.nist.gov/div898/handbook/prc/section2/prc222.htm 
  • http://www.itl.nist.gov/div898/handbook/ppc/section3/ppc333.htm 
  • http://en.wikipedia.org/wiki/Sample_size_determination 

4. Point and interval estimates 
Define and distinguish between confidence and prediction intervals. Define and interpret the efficiency and bias of estimators. Calculate tolerance and confidence intervals. (Evaluate)
  • http://blog.minitab.com/blog/adventures-in-statistics/when-should-i-use-confidence-intervals-prediction-intervals-and-tolerance-intervals 

5. Tests for means, variances and proportions 
Use and interpret the results of hypothesis tests for means, variances and proportions. (Evaluate)
  • //www.sixsigmatrainingfree.com/choosing-a-right-parametric-test.html (Choosing a right test)
  • ​http://z-scoretable.com (Z score calculator and z tables)
  • http://www.cliffsnotes.com/math/statistics/univariate-inferential-tests/one-sample-z-test (One sample Z test)
  • http://statcalculators.com/z-score-calculator/ (Z score calculator)
  • http://www.cliffsnotes.com/math/statistics/univariate-inferential-tests/one-sample-t-test (One sample T test)
  • http://www.cliffsnotes.com/math/statistics/univariate-inferential-tests/two-sample-z-test-for-comparing-two-means (Two sample Z test for comparing two means)
  • http://www.cliffsnotes.com/math/statistics/univariate-inferential-tests/two-sample-t-test-for-comparing-two-means (Two sample T test for comparing two means / DF for separate s: the smaller of n 1– 1 and n 2– 1 DF for pooled s: df = n 1+ n 2– 2)
  • http://apcentral.collegeboard.com/apc/members/courses/teachers_corner/49013.html (Why to pool variances)
  • http://www.cliffsnotes.com/math/statistics/univariate-inferential-tests/paired-difference-t-test (Paired T test)
  • http://www.cliffsnotes.com/math/statistics/univariate-inferential-tests/test-for-a-single-population-proportion (Z test for a single population proportion)
  • http://www.cliffsnotes.com/math/statistics/univariate-inferential-tests/test-for-comparing-two-proportions (Z test for a comparing two proportions)
  • http://www.itl.nist.gov/div898/handbook/eda/section3/eda358.htm (Chi squared test for the variance)
  • http://people.richland.edu/james/lecture/m113/f_test.html  (F test for Equality of two variances)

6. Analysis of variance (ANOVA) 
Select, calculate and interpret the results of ANOVAs. (Evaluate)
  • http://psychnut.com/statistics/even-more-about-1-way-anova/ 
  • http://www.psychstat.missouristate.edu/introbook/sbk27.htm 

7. Goodness-of-fit (chi square) tests
Define, select and interpret the results of these tests. (Evaluate)
  • http://math.hws.edu/javamath/ryan/ChiSquare.html 

8. Contingency tables
Select, develop and use contingency tables to determine statistical significance. (Evaluate)
  • http://math.hws.edu/javamath/ryan/ChiSquare.html 

9. Non-parametric tests
Select, develop and use various non-parametric tests, including Mood’s Median, Levene’s test, Kruskal-Wallis, Mann-Whitney, etc. (Evaluate)
  • http://www.micquality.com/6sigma101/glossary/nonparametric_tests.htm (Nonparametric tests)
  • http://www.isixsigma.com/tools-templates/hypothesis-testing/understanding-uses-moods-median-test/ (Mood’s Median)
  • http://en.wikipedia.org/wiki/Levene's_test (Lavene’s )
  • http://udel.edu/~mcdonald/statkruskalwallis.html (Kruskal-Wallis)
  • http://www.isixsigma.com/tools-templates/hypothesis-testing/making-sense-mann-whitney-test-median-comparison/ (Mann-Whitney)
  • http://www.statisticslectures.com/topics/friedman/ (Friedman)
  • http://www.scribd.com/fullscreen/75935945?access_key=key-1vck0xmn5rty1fu6jiop (1 sample sign test)
  • http://www.unm.edu/~marcusj/WilcoxonSR.pdf (Wilcoxon Signed Rank Test)

 C. Failure mode and effects analysis (FMEA)
Describe the purpose and elements of FMEA, including risk priority number (RPN), and evaluate FMEA results for processes, products and services. Distinguish between design FMEA (DFMEA) and process FMEA (PFMEA), and interpret results from each. (Evaluate)
  • Failure Modes and Effects Analysis with video tutorial
  • http://www.isixsigma.com/tools-templates/fmea/quick-guide-failure-mode-and-effects-analysis/ 
  • http://asq.org/learn-about-quality/process-analysis-tools/overview/fmea.html 
  • http://en.wikipedia.org/wiki/Failure_mode_and_effects_analysis 
  • http://www.differencebetween.net/technology/difference-between-dfmea-and-pfmea/ (DFMEA vs FMEA)
  • http://www.qualitytrainingportal.com/resources/fmea/fmea_dfmea_or_pfmea.htm (DFMEA vs FMEA)

D. Additional analysis methods
1. Gap analysis 
Use various tools and techniques (gap analysis, scenario planning, etc.) to compare the current and future state in terms of pre-defined metrics. (Analyze)
  • http://www.sixsigmaonline.org/six-sigma-training-certification-information/articles/gap-analysis.html 
  • https://www.captechconsulting.com/blog/kyle-fondren/process-power-tools-%E2%80%93-conducting-gap-analysis-while-modeling-the-future-state 
  • http://www.brighthubpm.com/six-sigma/47750-how-is-a-gap-analysis-used-in-the-six-sigma-process/ 

2. Root cause analysis
Define and describe the purpose of root cause analysis, recognize the issues involved in identifying a root cause, and use various tools (e.g., the 5 whys, Pareto charts, fault tree analysis, cause and effect diagrams, etc.) for resolving chronic problems. (Evaluate)
  • http://www.isixsigma.com/tools-templates/cause-effect/determine-root-cause-5-whys/ (5 whys)
  • Pareto Chart Analysis
  • http://asq.org/learn-about-quality/cause-analysis-tools/overview/pareto.html (Pareto Chart)
  • http://www.mindtools.com/pages/article/newTED_01.htm (Pareto Analysis)
  • http://en.wikipedia.org/wiki/Ishikawa_diagram (Cause and Effect/ Fishbone / Ishikawa Diagram) 

3. Waste analysis
Identify and interpret the 7 classic wastes (overproduction, inventory, defects, over-processing, waiting, motion and transportation) and other forms of waste such as resource under-utilization, etc. (Analyze)
  • http://leanmanufacturingtools.org/77/the-seven-wastes-7-mudas/ 
  • http://leanimprovement.blogspot.com/2012/04/tim-woods-7-1-wastes-taken-from-toyota.html 
  • http://www.lean.org/Common/LexiconTerm.aspx?termid=324&height=550&width=700 

​VII. Improve [23 Questions]

A. Design of experiments (DOE)
1. Terminology
Define basic DOE terms, including independent and dependent variables, factors and levels, response, treatment, error, etc. (Understand)
  • http://www.micquality.com/six_sigma_glossary/design_of_experiments.htm 
  • https://onlinecourses.science.psu.edu/stat503/node/67 
  • http://www.itl.nist.gov/div898/handbook/pri/section7/pri7.htm 

2. Design principles
Define and apply DOE principles, including power and sample size, balance, repetition, replication, order, efficiency, randomization, blocking, interaction, confounding, resolution, etc. (Apply)
  • https://onlinecourses.science.psu.edu/stat503/node/5
  • http://en.wikipedia.org/wiki/Fractional_factorial_design#Resolution (Resolution)

3. Planning experiments
Plan, organize and evaluate experiments by determining the objective, selecting factors, responses and measurement methods, choosing the appropriate design, etc. (Evaluate)
  • https://onlinecourses.science.psu.edu/stat503/node/5
  • http://www.micquality.com/six_sigma_glossary/balanced_design.htm (Balanced Design)
  • http://www.itl.nist.gov/div898/handbook/pri/section3/pri337.htm (Center Point)

4. One-factor experiments
Design and conduct completely randomized, randomized block and Latin square designs and evaluate their results. (Evaluate)
  • https://onlinecourses.science.psu.edu/stat503/node/13

5. Two-level fractional factorial experiments
Design, analyze and interpret these types of experiments and describe how confounding affects their use. (Evaluate)
  • https://onlinecourses.science.psu.edu/stat503/node/5
  • http://www.slideshare.net/tabraham/fractional-factorial-designs 

6. Full factorial experiments
Design, conduct and analyze full factorial experiments. (Evaluate)
  • https://onlinecourses.science.psu.edu/stat503/node/5

B. Waste elimination
Select and apply tools and techniques for eliminating or preventing waste, including pull systems, kanban, 5S, standard work, poka-yoke, etc. (Analyze)
  • http://www.lean.org/Library/BatchProcessesByArtSmalley.pdf (Pull systems)
  • http://www.lean-manufacturing-inventory.com/pushvspull.aspx (Pull and Push Systems)
  • http://en.wikipedia.org/wiki/Kanban (Kanban)
  • 5S
  • http://www.epa.gov/lean/environment/methods/fives.htm (5S)
  • http://blog.gembaacademy.com/2007/02/06/standard-work_06/ (Standard Work)
  • http://www.systems2win.com/c/time_definitions.htm (Standard Work and other Lean Terms)
  • http://en.wikipedia.org/wiki/Poka-yoke (Poka-yoke)

C. Cycle-time reduction
Use various tools and techniques for reducing cycle time, including continuous flow, single-minute exchange of die (SMED), etc. (Analyze)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA82&lpg=PA82&dq=wip+wiq+touch+time+takt+time&source=bl&ots=vdV3CLsPIJ&sig=N_PRWEKIHBsBRw0CSDrKcImMYNY&hl=en&sa=X&ei=ZJKQU9lBruKwBKeBgtAF&ved=0CCAQ6AEwAA#v=onepage&q=wip%20wiq%20touch%20time%20takt%20time&f=false (Process Flow Metrics)
  • http://en.wikipedia.org/wiki/Continuous-flow_manufacturing (Continuous-flow manufacturing)
  • http://rasmusson.wordpress.com/2008/04/16/batch-vs-continuous-flow-processing/ (Continuous-flow manufacturing)
  • http://www.leanproduction.com/smed.html (single-minute exchange of die (SMED))

D. Kaizen and kaizen blitz
Define and distinguish between these two methods and apply them in various situations. (Apply)
  • http://www.epa.gov/lean/environment/methods/kaizen.htm (Kaizen)
  • http://en.wikipedia.org/wiki/Kaizen (Kaizen)
  • http://www.slideshare.net/anandsubramaniam/kaizen-events-blitz-kaikaku-lean-projects (Kaizen and Kaizen Blitz)
  • http://asq.org/healthcare-use/why-quality/kaizen-blitz.html (Kaizen Blitz Road Map)

E. Theory of constraints (TOC)
Define and describe this concept and its uses. (Understand)
  • http://www.leanproduction.com/theory-of-constraints.html (Theory of Constraints)
  • http://www.mindtools.com/pages/article/toc.htm (Theory of Constraints)
  • http://www.isixsigma.com/methodology/theory-of-constraints/differences-between-theory-constraints-and-six-sigma/ (Six Sigma and Theory of Constraints) 

F. Implementation 
Develop plans for implementing the improved process (i.e., conduct pilot tests, simulations, etc.), and evaluate results to select the optimum solution. (Evaluate)
  • https://www.isixsigma.com/implementation/success-factors/8-steps-successful-lean-six-sigma-implementation/ 

G. Risk analysis and mitigation 
Use tools such as feasibility studies, SWOT analysis (strengths, weaknesses, opportunities and threats), PEST analysis (political, environmental, social and technological) and consequential metrics to analyze and mitigate risk. (Apply)
  • http://books.google.com/books?id=2RgkSH08zPEC&pg=PA121&lpg=PA121&dq=feasibility+study+six+sigma&source=bl&ots=CzwvuONHOh&sig=9KVcWjJa86Mom4I2fmIODXWjOx0&hl=en&sa=X&ei=2tiZU-XBFq3IsASDjYKIAQ&ved=0CFcQ6AEwBzgK#v=onepage&q=feasibility%20study%20six%20sigma&f=false (Feasibility Study p.128)
  • http://www.mindtools.com/pages/article/newTMC_05.htm (SWOT Analysis)
  • http://www.businessballs.com/swotanalysisfreetemplate.htm (SWOT Analysis)
  • http://www.businessballs.com/pestanalysisfreetemplate.htm (PEST Analysis)
VIII. Control [21 Questions]

A. Statistical process control (SPC)
1. Objectives 
Define and describe the objectives of SPC, including monitoring and controlling process performance, tracking trends, runs, etc., and reducing variation in a process. (Understand)
  • Statistical Process Control Charts: Process Variation Measurement and Management
  • http://en.wikipedia.org/wiki/Common_cause_and_special_cause_(statistics) (common cause and special cause variation)

2. Selection of variables
Identify and select critical characteristics for control chart monitoring. (Apply)
  • Statistical Process Control Charts: Process Variation Measurement and Management

3. Rational subgrouping
Define and apply the principle of rational subgrouping. (Apply)
  • http://www.qualityamerica.com/Knowledgecenter/statisticalprocesscontrol/rational_subgroups.asp 

4. Control chart selection
Select and use the following control charts in various situations: 
 individual and moving range (ImR), p, np, c, u, short-run SPC and moving average. (Apply)
  • http://www.statit.com/services/SPCOverview_mfg.pdf (Control chart types)
  • http://www.six-sigma-material.com/SPC-Charts.html (SPC Charts)
  • http://v5.books.elsevier.com/bookscat/samples/9780750665292/9780750665292.PDF (Cusum control chart)
  • http://www.integral-concepts.com/docs/What%20is%20a%20CUSUM%20Chart%20and%20When%20Should%20I%20Use%20One.pdf (Cusum control chart)
  • http://www.qualityamerica.com/Knowledgecenter/statisticalprocesscontrol/when_to_use_an_ewma_chart.asp (EWMA chart)
  • http://www.itl.nist.gov/div898/handbook/pmc/section3/pmc324.htm (EWMA chart)

5. Control chart analysis
Interpret control charts and distinguish between common and special causes using rules for determining statistical control. (Analyze)
  • http://en.wikipedia.org/wiki/Common_cause_and_special_cause_(statistics) (Common and special causes)
  • http://en.wikipedia.org/wiki/Western_Electric_rules 
  • http://en.wikipedia.org/wiki/Nelson_rules 
  • https://www.moresteam.com/toolbox/statistical-process-control-spc.cfm 
  • http://www.qualityamerica.com/Knowledgecenter/statisticalprocesscontrol/tampering.asp (Tampering)

B. Other control tools          
1. Total productive maintenance (TPM)
Define the elements of TPM and describe how it can be used to control the improved process. (Understand)
  • http://www.epa.gov/lean/environment/methods/tpm.htm 
  • http://en.wikipedia.org/wiki/Total_productive_maintenance 

2. Visual factory
Define the elements of a visual factory and describe how they can help control the improved process. (Understand)
  • http://www.micquality.com/six_sigma_glossary/visual_factory.htm 
  • http://www.kaizen-news.com/go-lean-visual-factory/ 
  • http://www.businessleaners.com/wp-content/uploads/2011/12/BL-Visual-Factory.pdf 

C. Maintain controls
1. Measurement system re-analysis
Review and evaluate measurement system capability as process capability improves, and ensure that measurement capability is sufficient for its intended use. (Evaluate)
  • https://www.moresteam.com/toolbox/measurement-system-analysis.cfm

2. Control plan
Develop a control plan for ensuring the ongoing success of the improved process including the transfer of responsibility from the project team to the process owner. (Apply)
  • http://www.dummies.com/how-to/content/performing-a-costbenefit-analysis.html
  • http://www.mathsisfun.com/money/net-present-value.html
  • https://www.moresteam.com/toolbox/control-plan.cfm

D. Sustain improvements
1. Lessons learned 
Document the lessons learned from all phases of a project and identify how improvements can be replicated and applied to other processes in the organization. (Apply)

2. Training plan deployment
Develop and implement training plans to ensure continued support of the improved process. (Apply)

3. Documentation
Develop or modify documents including standard operating procedures (SOPs), work instructions, etc., to ensure that the improvements are sustained over time. (Apply)

4. Ongoing evaluation 
Identify and apply tools for ongoing evaluation of the improved process, including monitoring for new constraints, additional opportunities for improvement, etc. (Apply)

IX. Design for Six Sigma (DFSS) Frameworks and Methodologies [7 Questions]

A. Common DFSS methodologies 
Identify and describe these methodologies. (Understand)
1. DMADV (define, measure, analyze, design and validate)
  • http://www.whatissixsigma.net/six-sigma-dmadv/ 
  • http://www.isixsigma.com/new-to-six-sigma/design-for-six-sigma-dfss/dmaic-versus-dmadv/ 
  • http://www.villanovau.com/resources/six-sigma/six-sigma-methodology-dmadv/#.U81tXONdUpk 
  • http://www.slideshare.net/anandsubramaniam/dmaic-vs-dmadv 

2. DMADOV (define, measure, analyze, design, optimize and validate)
  • http://books.google.com/books?id=yL7MBbUbKQQC&pg=PA415&lpg=PA415&dq=dmadov&source=bl&ots=vdV7CKqTGG&sig=prZ8LPV_GvVblmsFUXgh2S_mKk4&hl=en&sa=X&ei=_W3NU6mCH462yASZtoLQDA&ved=0CDUQ6AEwBg#v=onepage&q=dmadov&f=false 
  • http://innovationfunda.blogspot.com/2009/08/dfss-methodologies-dmadv-dmadvv-dmadov.html 

B. Design for X (DFX) 
Describe design constraints, including design for cost, design for manufacturability and producibility, design for test, design for maintainability, etc. (Understand)
  • https://en.wikipedia.org/wiki/Design_for_X

C. Robust design and process
Describe the elements of robust product design, tolerance design and statistical tolerancing. (Apply)
  • https://www.isixsigma.com/methodology/robust-design-taguchi-method/introduction-robust-design-taguchi-method/ 

D. Special design tools
1. Strategic
Describe how Porter’s five forces analysis, portfolio architecting and other tools can be used in strategic design and planning. (Understand)
  • https://www.mindtools.com/pages/article/newTMC_08.htm

2. Tactical
Describe and use the theory of inventive problem-solving (TRIZ), systematic design, critical parameter management and Pugh analysis in designing products or processes. (Apply)
  • http://www.umich.edu/~scps/html/07chap/html/powerpointpicstriz/Chapter%207%20TRIZ.pdf
Levels of Cognition based on Bloom’s Taxonomy – Revised (2001)

In addition to content specifics, the subtext for each topic in this BOK also indicates the intended complexity level of the test questions for that topic. These levels are from “Levels of Cognition” (from Bloom’s Taxonomy – Revised, 2001). They are in rank order - from least complex to most complex.

Remember
Recall or recognize terms, definitions, facts, ideas, materials, patterns, sequences, methods, principles, etc.

Understand 
Read and understand descriptions, communications, reports, tables, diagrams, directions, regulations, etc.

Apply 
Know when and how to use ideas, procedures, methods, formulas, principles, theories, etc.
 
Analyze
Break down information into its constituent parts and recognize their relationship to one another and how they are organized; identify sublevel factors or salient data from a complex scenario.

Evaluate
Make judgments about the value of proposed ideas, solutions, etc., by comparing the proposal to specific criteria or standards.

Create 
Put parts or elements together in such a way as to reveal a pattern or structure not clearly there before; identify which data or information from a complex set is appropriate to examine further or from which supported conclusions can be drawn
Six Sigma Training Test
IASSC Certification Exam Prep
Six Sigma Tables
Six Sigma Diagrams
Six Sigma Glossary
Six Sigma Belts' Roles
Check Out Forum
Powered by Create your own unique website with customizable templates.